Creality
WELCOME ON OUR 3D PRINTER FIRMWARE PAGE,
HERE YOU CAN DOWNLOAD THE LATEST MARLIN FIRMWARE COMPILED AND READY TO FLASH.
for now there are a few creality firmwares and one Geeetech firmware for use with Leadscrews. and the REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER.
please check which one you need both are online.
How do i flash any .hex files you’ll ask ……
EASY WAY
XLoader
For a Windows only solution, see Uploading Arduino HEX files with XLoader

- -step 1 open youre hex file
- step 2 set the device (for gt2560 boards and cr-10 choose atmega 2560
- set the right com port
- set your printers baudrate
- press upload
Features of the firmware’s
- Automatic Probe Point Setup
- Hotend and Bed PID regulation
- Hotend and Bed Protection
- Home offset tuning
- Individual Axis Homing
- Instant BabyStepping for Z Axis
- Junction Deviation Jerk Control
- Manual Mesh Leveling Support (for users without ABL)
- Bed Leveling Assistant (4or 5 Corners) for users not using ABL
- No volumetric extrusion
- PID Autotune menu
- SD Printing Power Resume
- Preheat for ABS & PLA
- S-Curve Acceleration
- Cr-10S Filament sensor
Firmware download
BLTOUCH VERSION configured on servo pin 11 on the cr10 board.
Creality CR-10S Marlin1.9.x bugfixes
Creality CR-10S Marlin1.9.x_BLTOUCH PETSFANG BULLEYE MOUNT
Don’t forget you’re Z OFFSET !!!
Marlin 2.0.x bugfix firmware
Cr10_bltouch.sanguino Marlin 2.xx UPDATED !!! probe on left with bullseye mount -42 -5Creality CR-10S Marlin 2.x.x Bugfixes
Creality BLTOUCH/3DTouch Marlin 2.0.x UPDATED !!(probe on left side on a bulleye fang) for other mounts x and y values please email me
Creality Cr-10 S5 Marlin 2.x.x bugfixes BLTOUCH setup Bulleye Mount UPDATED VERSION
Creality cr10 S4 marlin 2 bltouch setup bulleye mount
Updated
Creality Ender 3 / Ender 3 Pro
featured – manual mesh bed leveling
- manual mesh bed leveling Or Bltouch
- baby stepping
- corner bed leveling
- power/loss resume function
- Filament runout sensor active
- and more advanced settings
- Custom Bootscreen
Geeetech Printer
geeetech prusa Pro B with lead screw and full lcd led screen
REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER VERSION !!!!!!!!
main features
- Leadscrews T8 (esteps/mm set in firmware)
- Custom Bootscreen
- REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER (reverse connectors 180 degrees into the REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER)
- babystepping
- manual mesh leveling
geeetech pro b leadscrews only
STOCK DISPLAY VERSION !!!!!!
- manual mesh leveling
- babystepping
- leadscrews setup in esteps/mm in firmware
- for use with the stock display only !!!!!!!!